HI23211-1

Wall Mounted EC Digital Controller

$1,040.00

HI2321 is a wall mounted, microprocessor conductivity controller specifically designed to meet your process control requirements. This controller provides very accurate measurements due to the four-ring EC probe and Automatic Temperature Compensation (ATC) feature.

Fail Safe Alarm System.
CAL Check™ alerts users of calibration status.
Four-ring method provides an exceptionally stable measurement over a wider range.

Learn More

Thank you for your interest in our products. A representative will contact you within the next business day.

Fail-Safe Alarm System

Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller.

Isolated Recorder Output

To enhance troubleshooting and the ability to record data while monitoring, simply attaches a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Good Laboratory Practices (GLP)

The GLP feature allows users to store and recall data about system status for ultimate traceability.

Simple Installation

HI22111 has mounting holes molded into the housing to assure simple, quick and secure installation without the need for additional hardware.

Quality Construction

Housed in a rugged, modular, fiber-reinforced polypropylene housing that will resist the harmful effects of most chemicals.

Password Protection

The Hanna password protection feature keeps these controllers safe from tampering. Only users with the proper password can change the settings of these controllers.

Resources

Specification

Specification Name	Detail
sku	HI23211-1
EC Range	0.0 to 199.9 µS/cm, 0 to 1999 µS/cm 0.00 to 19.99 mS/cm, 0.0 to 199.9 mS/cm
EC Resolution	0.1 µS/cm, 1 µS/cm, 0.01 mS/cm, 0.1 mS/cm
EC Accuracy (@20°C/68°F)	±0.5 % full scale (EC and TDS)
Temperature Range	-10.0 to 100.0 °C
Temperature Resolution	0.1 °C
Temperature Accuracy (@20°C/68°F)	±0.5°C between 0 to 70°C, ±1°C outside
Typical EMC Deviation	±2 % full scale (EC and TDS) / ±0.5 °C
Installation Category	II
Temperature Compensation	Automatic or manual, -10 to 100°C Compensation with β adjustable from 0.00 to 10.00%/°C
Analog Input	4 to 20 mA (isolated)
Analog Output	0-10 Vdc, 0-5 Vdc or 1-5 Vdc; 0-1mA, 0-20 mA or 4-20mA
Baud Rate	1200, 2400, 4800 and 9600
Probe	4-ring conductivity probe with built-in 3-wire Pt100 temperature sensor or conductivity probe + external Pt100
Power Supply	230 ±10% VAC or 115 ±10% VAC, 50/60 Hz
Power Consumption	15 VA
Over Current Protection	400 mA 250 V fast fuse
Relays 1, 2	Contact outputs SPDT, 5A-250 VAC, 5A-30 VDC (resistive load)
Alarm Relay	Fuse protected: 5A, 250V fuse
Environment	0-50 °C; RH max 85% non-condensing
Enclosure/ Case Material	Fiber-reinforced, self-extinguishing ABS
Protection	IP54
Dimensions	221 x 181 x 86 mm (8.7 x 7.1 x 3.4”)
Weight	1.6 kg (3.5 lb.)

Product Manuals

MANHI23R1_05_05 Download